Document asks
Ask for the current dimensional or construction page that names the quoted hose, not a plant brochure.
| Ask | Why |
|---|---|
| ID / OD page | Inches or millimetres on the priced item |
| SAE or ASTM cite | A named method if the inspector will run one |
What a factory needs before it can answer a rubber hose brief
These three desks replace a datasheet portal, a material selector and a CAD library. They are checklists. They are not files this desk publishes.
Construction questions
Tube compound, textile or wire reinforcement and cover stay blank until the buyer or factory writes them.
| Axis | Unit |
|---|---|
| Working pressure | psi or bar the supplier must confirm |
| Service temperature | °F or °C with the medium |
End and length check
Bulk length without fittings is not a crimped assembly. Write thread type or flange if the ends are priced.
| Field | Pairing |
|---|---|
| Length | Feet or metres on the same line as ID |
| Ends | Open, crimped, swaged or flanged stays on the priced line |
What separates this family from a neighbouring hose request
Industrial transfer, not a hydraulic-only station
This site opens industrial rubber hose for water, air and material handling. A dedicated hydraulic-hose brief (SAE 100R2, 350 bar class) belongs on its own request. Mixing the two families makes burst and working-pressure cells look comparable when they are not.
Form still has to be named
Point at bulk length, crimped ends, a reinforced construction, a protective sleeve, or a cut-to-length assembly on the products page. Pointing at a form still leaves every rating, certificate, lead time and price subject to supplier confirmation.
The buyer keeps the specification decision
Inner diameter, medium and whether a sample must be approved before the production lot stay with the purchasing team. This desk copies the same list to more than one factory so replies can be laid side by side. See how the request is issued.
Axes a factory must fill, not numbers this desk reprints
Observed product-family pages talk in axes. The cells below are questions. They are not published hardness, pressure or temperature figures for any option on this site.
| Thermal | Chemical | Mechanical | Compliance |
|---|---|---|---|
| Service temperature in °F or °C with the medium | Water, air, oil mist or the named fluid | Inner diameter in inches or millimetres | Named SAE or ASTM method if the inspector will run it |
| Continuous versus intermittent heat | Ozone or outdoor UV on the cover | Working pressure in psi the supplier must confirm | Food-contact or drinking-water file only if the buyer named a grade |
| Low-temperature flexibility if the line sits outside | Tube compound the factory proposes in writing | Reinforcement: textile, helix or wire | Plant ISO 9001 is not a lot test |
Where buyers usually open a rubber hose request
These cards describe duty, not a promised installed result. Rubber Hose Sourcing does not install hose or certify a system.
Shop air
Compressed air tools. Write ID, working pressure and coupling type.
Water transfer
Plant water or wash-down. Temperature and whether the line is suction or discharge stay on the brief.
OEM equipment
A drawing-based cut length. End fittings belong on the same invoice line as the hose.
Material handling
Abrasive solids change cover and helix questions. Treat a thinner wall as a new request.
Outdoor yards
UV and low temperature. A generic “rubber” label is not a named compound.
Files to request from the named factory
These cards are document names, not badges this desk wears. A company certificate does not stand in for a lot test on the quoted construction.
REACH
Ask whether the quoted tube and cover have a current SVHC statement for that grade.
RoHS
Useful when the assembly enters an electrical enclosure. The file must name the construction.
FDA 21 CFR 177
Only if the buyer asked for food-contact. The file has to name the grade and the lot, not the trading desk.
ISO 9001 / IATF 16949
Plant-system papers. They do not replace a dimensional page or a pressure confirmation.
What this desk will and will not put on paper
Role
Match factories, issue one list, compare replies on the same axes.
Scope
Rubber Hose category only. Animation or fashion homonyms are out of scope.
Market
US-intent buyers. Destination state or postal code belongs on the brief.
Evidence
Supplier documents for the named line. No site-owned stock list or price book.
Send the axes you already have
A photo or a competitor part number is a starting point, not a specification. Missing fields stay visible instead of being filled in by this desk. Comparison is of total procurement cost on the same quantity, packing and Incoterms — not a percentage against an unnamed market price.
Request Factory Quotes Read the request checklist